Solar light pole specification
August 31, 2018
1. The main solar energy garden light pole adopts one-time forming technology. The steel rod weld seam is required to be smooth and smooth. The flat part of the whole light rod body weld protrusion and the rod body should be no more than 1mm. The pole welding is automatic sub-arc welding. The coloring flaw detection has reached the requirements of the international welding standard, and the lamp pole socket method is fixed by using nails and top wires;
2. The anti-corrosion treatment method of the lamp post is hot-dip galvanizing. The surface of the galvanized layer is smooth and beautiful, the gloss is uniform, wrinkles, wrinkles and defects such as zinc, spots, yin and yang are present, and the thickness of the zinc layer is above 85um, galvanized layer Adhesion should conform to the standard, ensure that it will not fade in 8 years, the wind resistance of the pole is designed to be 36.9 m / s, and the anti-corrosion life of the pole is greater than 20 years;
3, the surface of the lamp post is ≧100um, the surface is smooth: the hardness is ≧2H, the weather-resistant material used outdoors, the spray material is all-polyester plastic powder;
4. The lamp pole process and acceptance criteria are implemented in accordance with national standards. With a design factor of 1.8, the design life of the pole is greater than 20 years;
5. The design of the solar garden light pole should be convenient for the wire to be connected, and the hand hole door is in the form of a backpack door. The door must be smooth and smooth, and the deviation from the flatness of the rod should be no more than 1mm. The matching of the same pole door and the door is better, and the anti-theft and rainproof requirements are met. After the rod door is cut, the part is strengthened, which basically reaches the strength of the original integral rod;
6, appearance color: according to the owner specified color.
